Tag Archives: equipment

A Dutch Oven Cook-off at Tyler State Park

Teardrop Trail Log: March 23, 2018

No campout would be complete without some outdoor cooking, and we had an extra incentive to make our food memorable on the trip to Tyler State Park — A Dutch Oven Cook-off! I’ve used cast iron since I was a child, and although cookware innovations come and go, an old cast iron skillet or pot never fails. I used to host potluck parties for my staff at the University and there were always bean dishes, cobbler and other goodies cooked in cast iron. Likewise, Marilyn is an old-hand when it comes to cast iron and camp food, having been a trail chef at a dude ranch and learned at the knee of her father, who made some of the best cast iron beans ever. We felt like we could mount a respectable effort in the cook-off.

New cast iron toys

After much consideration, we settled on a Mac and Cheese topped with Pork Chops dish figuring nothing succeeds like “over-the-top” excess. Marilyn prepped carefully, pre-measuring the ingredients at home so cooking in camp would be as easy and foolproof as possible. I prepped our best 12-inch Lodge dutch oven and laid in a stock of charcoal. I bought a few toys as well from a Camp Maid grill and smoker set and dutch oven carry bag to a simple steel feed pan to stoke the charcoal. Nothing left to chance.

The cook-off was on Friday. Preparations were underway throughout the park with dozens of entries from the members of the Southwest Teardrop and Vintage Trailer Association members. Marilyn had cooked the macaroni a little earlier in the afternoon, and all was in readiness. I started the charcoal at about 4 PM knowing that the food had to be delivered to the potluck no later than 6 PM to be eligible. Precision timing was of the essence.

This slideshow requires JavaScript.

This photo sequence shows the process from start to finish — delivered to the hungry crowd at 6 PM on the dot. Let’s just say that no one went away hungry!

Southwest Teardrop and Vintage Trailer Cast Iron Cook-off

A New Way to Level a Teardrop

Original scissors-jack handle

Teardrop Trail Log: June 8, 2017

After three seasons of Teardropping, I still wasn’t happy with my trailer leveling solution. I originally purchased a pair of scissors jacks, but the folding handles they came with were frustrating to use. Also, the jacks had a tendency to fall over before they came in contact with both the ground and the trailer.

Stabilizers Aren’t Perfect

Next I tried stabilizers, and although they had advantages, they didn’t work as well with uneven ground. They were perfect in combination with a scissors jack though. By lifting each trailer corner where a stabilizer was attached, they could be easily extended and provided a rock-solid platform once set.

So, back to the scissors jack. What could I do to improve on the basic Harbor Freight design? I didn’t want to modify the actual jack, but wanted an adapter that would allow the use of a cordless drill instead of the wacky and hard-to-use folding handle.

An Improved Scissors Jack

The scissors jack adapter

The solution turned out to be very simple. The handle receptacle, a “U”-shaped piece of metal the connects with the handle hook, was large enough to receive a 5/8-inch piece of threaded rod, and then capture a 5/8-inch nut inside the handle receptacle. A 9/16-bolt welded perpendicular to one face of the 5/8-inch nut, would then turn the handle receptacle when captured by the 5-8-inch rod.

Drill driving the scissors jack

I talked with my friends at Vintage Auto, and they had it welded up in a few minutes, and even painted it. Back at the house, I found I could easily run the scissors jack up and down with a 12-volt DeWalt cordless drill. A test on the trailer was successful also — the combination easily lifted the trailer.

We would use it camping for the first time at the Red Power Roundup in Des Moines, Iowa (that’s why the bolt has an International Harvester Red head), and I had the trailer leveled and on the stabilizers in about 20-minutes. A new record!

Scissors jack adapter in use

A Solar Upgrade for the Teardrop Trailer

Teardrop Trail: June 4, 2017

In the last few months, I’ve been working on a larger solar system to pump water at the ranch. We live out in the Texas Hill Country and occasionally experience power interruptions, and I wanted to use solar power to improve our emergency preparedness. The experience of designing and building that system led me to rethinking the teardrop solar system.

A New Battery

Cutting a hole for the data display

Two 100-watt solar panels provide enough power to meet our modest camping needs, but I felt the battery could be improved. We were using a marine battery, but it was a compromise between high starter current (which we would never use) and deep-cycle power for camping use. An Absorbed Glass Mat (AGM) deep-cycle seemed a better match. I ordered an Optima D34M Blue Top that could supply up to 55 Amp/hours of power and fit into the modest available space.

And a way to measure it

The new data display

Of course, fully discharging any lead-acid battery will shorten its life and normally one leaves at least a 50% charge. How do you know when you’ve reached 50% remaining power? You can estimate from the battery voltage, but measuring power directly would be best. That led to the second upgrade; a digital energy meter. It shows voltage, current and power, as well as the total power in watt/hours consumed since the last reset. Using the Optima battery as an example, I could use up to 330 watt/hours of power ((55 amp/hours / 2) * 12 volts = 330 watt hours) before it was wise to recharge.

Electric Kettles for Camping?

Finally, we enjoy electric kettles for heating water, and they’re perfect for camping. In many campgrounds, shore power is available and we can heat water for tea, coffee and washing up with ease. Would it be possible to use an electric kettle on solar power?

With 1000 watt inverter installed

Researching electric kettles and hot pots I found one model that only used about 1000 watts. A lot of power, but within reach of a not-too-expensive 12-volt to 120-volt inverter. It looked like fun to see if I could make it work, and I ordered an inverter and the necessary wiring to hook it up. Besides; the same inverter could be used to power a Crockpot or Slow-cooker — something we’ve already shown is practical.

The picture tells the story. The new battery, inverter and hot pot were connected and did indeed heat 12 ounces of water to boiling. It used 164 watt/hours of energy as measured by the new digital meter — about half of the available battery storage. Not too practical, but a fun experiment!

: Boiling water with solar energy

: Boiled water energy consumption

An Expert’s Take on Essential First Aid

A few weeks ago we attended the Mother Earth News Fair in Belton, Texas. This was our second year, and we always enjoy seeing the seminars and venders that support the varied community that this unique event attracts. We had just about “covered the waterfront” and were getting ready to leave when I spotted the AMP-3 booth. The amateur radio solar batteries, compact portable antennas and go-bags caught my attention and we began chatting with David Pruett, the proprietor.

As we talked, I noticed another line of products relating to first aid, and quickly learned that David is a practicing ER physician and began putting first aid kits together several years ago. His medical experience, as well as direct experience with two natural disasters in Northern California convinced him of the need for preparedness. I began thinking about our teardrop camping trips (not to mention our Roy Creek Ranch home) and how well prepared we were for emergencies when we’re away from an ER or other urgent care provider.

We have an American Red Cross First Aid Kit in the trailer, but David’s company, AMP-3 was offering the next step. While the Red Cross kit was a good start, it is focused on cuts, scrapes and minor pain. It wasn’t very expensive, and there is no reason not to have one or two for minor wound care.

photo of an individual first aid kit contents

iFAK contents

AMP-3 offers an “Individual First Aid Kit (iFAK)” that starts with more extensive wound care and adds tools, irrigation, adhesives and medications for managing wounds, bleeding, pain, digestive and some allergic distress. Best of all, David has a series of YouTube videos that describe building an individual first aid kit, what to include and how each item is used.

I bought one iFAK at the fair, and appreciate the guidance and peace of mind it provides. With both the Red Cross and AMP-3 kits in our teardrop trailer, we feel more prepared for many situations we might encounter on our travels — especially when we’re away from civilization.

Are you prepared?

Antenna (or Fishing Pole) Storage on a Teardrop

Ten Tec Triton II with digital frequency readout

I knew from the beginning there would be amateur radio aboard our teardrop trailer. I’ve been interested in radio since junior high, and it’s great to be out in the woods with a battery (or solar) powered radio, talking to hams around the world. I will never forget making my first overseas contact while driving through Wyoming in a thunderstorm. Or skiing down a mountain with a handheld radio while talking with another ham stuck in the city. Magic!

Radios have gotten smaller and more capable, and can be powered with modest solar-power systems, so ham radio from a teardrop trailer is a natural. Antennas, on the other hand, are about the same size. You can’t change physics or the laws of nature. Mobile antennas, while smaller than their fixed base comrades are still several feet long, and storing them is a challenge in our tiny teardrop. What about storing them in a long tube mounted to the rear frame of the trailer?

3-inch PVC with plastic strap hangers

I’ve worked with PVC pipe alot through the years, and the solution was obvious. A 5-foot length of 3-inch inside diameter pipe would easily store several antennas and their resonators (after disassembling them into sections) without taking up space inside the trailer. Each end was sealed with a screw-on “clean out” and voilà! Secure storage for my skyhook treasures. Several plumber’s straps would attach the pipe to the trailer frame. It’s cheap, strong and easy to work with. The job was done in no time and we set off.

Repairing the antenna tube

It wasn’t long before there was a problem. The trailer transmits substantial vibration and shaking to the tube, and the constant motion tends to break the plumber’s straps. Fortunately they don’t all break at once, but I was replacing straps often. I needed a better solution.

Improved steel strap hanger

Cruising around the home store one day, I found it. Zinc Plated, punched-steel bar. 1 3/8-inches wide and made of 1/16-Inch steel, it’s plumber’s strap on steroids.

Mounting Bracket

A 48-inch piece is only about $7, and with some 1/4-20 bolts, washers and nuts, I was in business. I took a scrap of 3-inch PVC, and wrapped it using a vice and hammer to form the steel. It is stiff enough to be challenging, but has a comforting level of strength. Drilling the frame for the 1/2-20 hardware isn’t hard, and two brackets are perfectly adequate. No more strap repairs for this teardrop!

By the way, for those of you who like to dangle a worm or two while camping — the tube could store fishing poles as well. I’m just sayin’ . . .

Antenna storage tube secured

Roaming Around Red Power

Teardrop Trail Log: June 17, 2016

Tractors are fun, but the best part of Red Power is reconnecting with old friends and making new ones. This year was our third at the ‘Roundup, and I set off to see who I could find. Although not as spread out as previous years, the Racine County Fair was still a lot of ground to cover, and it would be a challenge to see it all. On the way, there were surprises and things that, well, you just don’t see everyday.

: Transport for Two

: Patiently waiting in the early tractor shed

: A wagon with a “pup”

: A beautiful orchard tractor

: International RFD

: Shade to go

In the early tractor shed, there was the expected shiny early 20th-century equipment — beautifully restored and ready to transform the life of some old-time farmer who was more accustomed to working with horses. The next bay held a surprise though: a rusted hulk of a 1936 Farmall Model F-12 with a swarm of men intent on various tasks. Reading the nearby sign, I learned that they meant to completely rebuild this “found in the woods” beauty in the three days of the ‘Roundup — including a fresh coat of McCormick-Deering painted livery. If they were successful, that would be impressive!

: Rebuilding a 1936 Farmall F-12

: There is a lot yet to do.

: All ages pitched in.

: They’ve been around this wrench before.

And right next to the rebuild crowd, was my friend Charlie Uthke, who is usually surrounded by a knot of fans for his engine stands and alternator conversions. We camped with Charlie and his wife at our first Red Power Roundup in Huron, South Dakota in 2014 and I remember the good campfire conversations. We only see them once a year, but it’s always fun to catch up.

The Uthke’s

Victor Horizontal Hit-Or-Miss Engine

Continuing my stroll through the machinery exhibits, I encountered a Victor Horizontal Gasoline Engine. You see “hit-or-miss” engines at every Red Power Roundup, but this was the largest model I had ever seen. Judging by the size of the fly wheel, this beautifully-restored single-cylinder engine must have been rated at about 20 horsepower. With the integrated wagon, it was considered portable and was even equipped with the optional cooling tank and muffler.

The Victor Horizontal Engine

According to Dun’s Review, International Edition (Vol. XX, September, 1912), the Victor was “A reliable, economical and convenient source of power for various purposes around the farm, shop or mill” and was “built in eight sizes, ranging from 4 to 25 horsepower”. The “make-and-break” ignition on the four-cycle engine used a “hit-or-miss style governor” to control the speed. It could run on natural or artificial gas (a mixture of hydrogen, methane and carbon monoxide), alcohol, kerosene or gasoline. “A catalogue giving full details and illustrations of these engines” could be requested from International Harvester by mail. It was high-tech in 1912.

As I watched the machine operate, it was fun to see how people reacted to it. We take compact, portable and inexpensive power for granted today (think: lithium-ion battery powered tools, bicycles or automobiles for example) but such an engine would have been special in its day and represented major labor savings when pumping water, milling grain, cutting wood, or running anything that required rotary power on farms that wouldn’t have electricity for some decades. A marvel of the age indeed.

Tasty Trail Red Power Food

Teardrop Trail Log: June 17, 2016

The Tasty Trail has taken us to some amazing culinary adventures with a variety of great eats and fairground cuisine at each of the Red Power Round Up events. At the Racine County fairgrounds, many of the food concessions were operated by community organizations like the Kiwanis, Future Farmers of America and 4H bringing a local perspective to the menu.

A fairground 4H breakfast

For breakfast, we selected the 4H concession. They were serving up biscuits with ham and cream gravy, like the gravy often found on Chicken Fried Steak. This comfort food has a long history, with a balance between flour and grease for the perfect consistency. As we waited for our food, we watched as the adults teaching youngsters to take orders, write tickets and place orders while preparing the iconic fairground breakfast. It was so tasty, we returned the next day.

Another day, we waited in line for mouth-watering brats for lunch at the stand run by members of the Kiwanis club. It seemed that everyone else had been lured in by the amazing smell of brats that wafted around the grassy area in the middle of the grounds.

photo of Proctor Silex 33116Y Slow Cooker

Proctor Silex Slow Cooker

For dinner – we decided to add a small crockpot to our Teardrop kitchen. It was a perfect way to have a wonderful dinner at our campsite at the Racine County Fairgrounds. I loaded up the tiny cooker before going out for the book signing and my presentation on Irma Harding. Dinner was waiting when we returned. Here is our recipe.

Teardrop Pork Chops

2 boneless Pork chops (3/4″ thick)
1 chicken bouillon cube
1/4 cup hot water
2 Tbsp Dijon Mustard
2 small onions
freshly ground pepper

Sear the pork chops. Dissolve bouillion in the hot water, add mustard and stir.
Cut off the ends, and peel the onions, then cut in half cross wise to make 4 thick “wheels”.
Place the onions on the bottom of the Crockpot in a single layer.
Once chops are seared, place them atop the onions.
Add salt and fresh ground pepper to taste, and slowly add the liquid over all.
Cook for 4.5 hours

The Teardrop Gets a Solar Power Upgrade

Teardrop Trail Log: September 20, 2016

MC4 solar branch connectors

After the unfortunate incident with the solar panel on our way to the Red Power Roundup, we were able to use shore power for the remainder of the trip. Disappointing, but not a show stopper. We had already determined that a single 100-watt panel was not enough for our needs, so I was planning an upgrade anyway. With a trip planned in late September, it was time to act. I ordered two new 100-watt panels, MC4 combiner connectors and additional MC4 crimp-on connectors. This would double our previous power capacity and allow for daytime use of a couple of small appliances including a crock-pot and solid-state cooler.

Aluminum bar seals leading edge to teardrop

Analysis of the incident and the remaining parts of the old panel made it clear that wind entering the leading edge had repeatedly flexed the panel causing it to fatigue and ultimately fail. It seemed to me that sealing the leading edge to the teardrop roof with a rigid mount would prevent this type of failure in the future. A trip to Home Depot secured an aluminum strip, and by drilling holes that matched the existing screw mounts, I could seal the leading panel to the teardrop skin. The leading panel then overlapped the other panel so it was also sealed to the wind.

The new panels began working immediately

Once installed, the panels began producing power immediately. Although we currently only have about 80 Amp-hours of storage, the two panels can easily replace the day’s power use with 10 to 12 amp output in full sun. Also, by adding a 300-watt inverter, we are able to run a 1 1/2 quart crock pot during the day with power to spare. The next upgrade will be a larger battery.

The Ambassador was ready for a trip to Bob Sandlin State Park.

photo of solar panels on teardrop trailer

The panels overlap like shingles

Raccoon Caper #2 – The Nocturnal Invasion

Teardrop Trail Log: June 14, 2016

Camp Mark Twain State Park established and a scrumptious chicken dinner under our belts, we cleaned the dishes and put away the food. We’ve camped in numerous national and state parks in the last few years, and have developed a bedtime routine. Galley closed, kitchen boxes stacked and Igloo cooler closed. Time for bed. Marilyn is usually earlier into bed than me, but I was tired as well and we turned in. Soon we were both asleep.

Raccoon crime in Progress

I’m a light sleeper and usually up in the middle of the night, but this night I was awakened by a commotion outside. Crash! Bang! What on earth?! I sleep next to the door in our teardrop, and grabbing my iPhone (always ready for a photo!) I opened the door and leaned out. We had a raccoon in camp, and he was exploring our stuff. Pushing the door open and stepping out, I made some noise and the invader escaped. Even though it was dark, I could see we’d been raided. The cooler was open, and various wrappers were scattered around. Well, the damage was already done so I went back to bed. We could survey the crime scene in the morning.

The evidence

Marilyn was the first one up in the morning and cleaned up the mess. The raccoon had opened the Igloo cooler (we even have trouble opening that!) and scored a pound of bacon, a pound of butter, two pounds of lunch meat, several eggs and a yogurt.

Not easy to open

It was able to open the egg containers and that’s not easy. It was also able to get the meat and bacon out of zipper bags without destroying them. Apparently they can work the zipper pulls. Their scientific name is appropriate: Procyon lotor or extremely dexterous front paws.

Later, when Marilyn went to the camp office to buy more ice, she mentioned the raid, and the camp host wasn’t surprised. It seems the local raccoons have developed a taste for beer and are able to open pull-tab cans. Two nights of camping so far, and two incidents. I wonder if they prefer lagers or ales?

Tiny raccoon fingerprints

Share this:

Stabilizers Aren’t Perfect

An Improved Scissors Jack

Share this:

A New Battery

And a way to measure it

Electric Kettles for Camping?

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this: